Simulations of NBI fast ion loss in the presence of toroidal field ripple on EAST

NBI fast ion losses in the presence of the toroidal field ripple on EAST have been investigated by using the orbit code GYCAVA and the NBI code TGCO. The ripple effect was included in the upgraded version of the GYCAVA code. It is found that loss regions of NBI fast ions are mainly on the low field side near the edge in the presence of ripple. For co-current NBIs, the synergy effect of ripple and Coulomb collision on fast ion losses is dominant, and fast trapped ions located on the low field side are easily lost. The ripple well loss and the ripple stochastic loss of fast ions have been identified from the heat loads of co-current NBI fast ions. The ripple stochastic loss and the collisioninduced loss are much larger than the ripple well loss. Heat loads of lost fast ions are mainly localized on the right side of the radio frequency wave antennas from the inside view toward the first wall. For counter-current NBIs, the first orbit loss due to the magnetic drift is the dominant loss channel. In addition, fast ion loss fraction with ripple and collision for each NBI linearly increases with the effective charge number, which is related to the pitch angle scattering effect.     

基于MF-DCCA 的呼吸道疾病与大气污染物相关性分析

针对呼吸道系统疾病与大气 PM2:5、 SO2 浓度序列的相关性特征, 应用多重分形消除趋势波动分析法 (MF-DCCA), 对张家界市永定区呼吸道系统疾病患病人数与大气 PM2:5、 SO2 浓度序列进行了研究。结果发现该地区 呼吸道系统疾病患病人数与大气 PM2:5、 SO2 浓度的相关性具有长期持续特征和多重分形特征。随后对它们相关性 多重分形特征的动力来源进行了分析, 通过随机重排和相位随机处理, 结果表明在不同时间尺度上的长期持续性影响 是其主要动力来源。进一步研究发现该地区呼吸道系统疾病与大气 PM2:5、 SO2 浓度序列的相关性在四个季节均具 有长期持续性的多重分形特征, 且夏季多重分形特征相对强于其他季节。     

Chromium-promoted preparation of forsterite refractory materials from ferronickel slag by microwave sintering

The chromium-promoted preparation of forsterite refractory materials from ferronickel slag was investigated by microwave sintering of the slag with the additions of sintered magnesia and 0–10 wt% chromium oxide (Cr₂O₃). The thermodynamic calculations revealed that the addition of Cr₂O₃ can promote the formations of spinel and liquid phase and maintain high content of forsterite below 1500 °C. The experimental results showed that there existed a stronger promoting effect of Cr₂O₃ additive on the properties of refractory materials in the microwave field than that in conventional sintering. It was attributed to the preferential formation and growth of spinel with stronger microwave absorption than other phases (e.g., enstatite), the existence of more forsterite, and the enhanced densification in association with the presence of more liquid phase at the same temperature. By microwave sintering of the mixture of ferronickel slag, 25 wt% sintered magnesia, and 4 wt% Cr₂O₃ at 1350 °C for 20 min, a superior refractory material with refractoriness of 1801 °C, thermal shock resistance of 6 times, bulk density of 2.97 g/cm³, apparent porosity of 1.4%, and compressive strength of 197 MPa was obtained. Compared with that prepared by conventional sintering at 1350 °C for 2 h, the refractoriness and thermal shock resistance were increased by 175 °C and 100%, respectively. The present study provided a novel method for preparing high-quality refractory materials from ferronickel slag and relevant industrial wastes.     

Preparation of a ternary hybrid of P-g-C3N4@PGS-Ti and its enhancement of the flame retardancy of epoxy resins

A novel ternary hybrid flame retardant named P-g-C₃N₄@PGS-Ti was prepared through step-by-step method. First, titanium dioxide was loaded on PGS to make PGS-Ti (where PGS = palygorskite), and then, PGS-Ti was decorated by phosphor-doped g-C₃N₄ (abbreviated as P-g-C₃N₄) to prepare a ternary flame retardant of P-g-C₃N₄@PGS-Ti. It showed that P-g-C₃N₄@PGS-Ti could efficiently improve the flame retardancy of epoxy resins (EP). The structure and the morphology of P-C₃N₄@PGS-Ti were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scaanning electron microscopy and hermogravimetric analysis (TGA). The flame retardancy and the burning behavior of 5 wt% P-g-C₃N₄@PGS-Ti composited EP were well investigated through TGA, limiting oxygen index (LOI), cone calorimeter test (CCT) and vertical burning test (UL-94 standard). It was found that the peak heat releasing (pk-HRR) of the EP/P-g-C₃N₄@PGS-Ti composite reduced 36% (from 1459 to 852 kW/m²) with the addition of 5 wt% of P-g-C₃N₄@PGS-Ti flame retardant to the matrix of EP. The combustion residue analysis showed that the EP/P-g-C₃N₄@PGS-Ti composite gained the most continuous and firmest char yield due to the synergistic effect of PGS, TiO₂ and the introducing of P element. The mechanism proved that the combination of gas phase and condensed phase flame-retardant processes were well coordinated to improve the fire retardancy for EP. We tested and studied the mechanical properties of EP/P-g-C₃N₄@PGS-Ti composites. Only 2.4% decreasing of flexural strength and 23.5% decreasing of impact strength in EP/P-g-C₃N₄@PGS-Ti composites compared to pure EP, respectively. But according to the test results of EP/P-g-C₃N₄@PGS-Ti composite material and the control sample in the system, EP/P-g-C₃N₄@PGS-Ti composite material had the highest flexural modulus and impact strength.     

水夹点技术在高校食堂洗菜工艺中的应用

以洗菜工艺为例,利用水夹点技术对某高校中某食堂清洁用水进行分析,实现了生活用水的节水减排目标,节约水量分别占洗菜工艺和全用水过程的65％和28％.     

Eco-friendly and degradable red phosphorus nanoparticles for rapid microbial sterilization under visible light

Pathogens pose a serious challenge to environmental sanitation and a threat to public health.The frequent use of chemicals for sterilization in recent years has not only caused secondary damage to the environment but also increased pathogen resistance to drugs,which further threatens public health.To address this issue,the use of non-chemical antibacterial means has become a new trend for environmental disinfection.In this study,we developed red phosphorus nanoparticles(RPNPs),a safe and degradable photosensitive material with good photocatalytic and photothermal properties.The red phosphorus nanoparticles were prepared using a template method and ultrasonication.Under the irradiation of simulated sunlight for 20 min,the RPNPs exhibited an efficiency of 99.98%in killing Staphylococcus aureus due to their excellent photocatalytic and photothermal abilities.Transmission electron microscopy and ultraviolet–visible spectroscopy revealed that the RPNPs exhibited degradability within eight weeks.Both the RPNPs and their degradation products were nontoxic to fibroblast cells.Therefore,such RPNPs are expected to be used as a new type of low-cost,efficient,degradable,biocompatible,and eco-friendly photosensitive material for environmental disinfection.     

Non-Halogenated-Solvent Processed and Additive-Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Organic solar cells (OSCs) have recently reached a remarkably high efficiency and become a promising technology for commercial application. However, OSCs with top efficiency are mostly processed by halogenated solvents and with additives that are not environmentally friendly, which hinders large-scale manufacture. In this study, high-performance tandem OSCs, based on polymer donors and two small-molecule acceptors with different bandgaps, are fabricated by solution processing with non-halogenated solvents without additive. Importantly, the two active layers developed from non-halogenated solvents show better phase segregation and charge transport properties, leading to superior performance than halogenated ones. As a result, a tandem OSC with high efficiency of up to 16.67% is obtained, showing unique advantages in future massive production.     

光敏剂在光动力治疗中的应用研究进展

光动力疗法（PDT）以其超高时空分辨率、非侵入性及低毒副作用的优点，被认为是治疗癌症和各种非恶性疾病的有效疗法之一。本文主要综述了几类光敏剂发展历史、主要结构、特点及研究进展，分析了高性能光敏剂的开发动态，包括化学修饰；与具有特定细胞受体的其他配体缀合成复合光敏剂；采取纳米技术，如纳米颗粒输送，基于富勒烯的光敏剂等。基于此，指出具有临床应用前景的高性能光敏剂的基本特征、设计原则及发展趋势。     

α-Methylene-β-Lactone Scaffold for Developing Chemical Probes at the Two Ends of the Selectivity Spectrum

The utilities of an α-methylene-β-lactone (MeLac) moiety as a warhead composed of multiple electrophilic sites are reported. We demonstrate that a MeLac-alkyne not only reacts with diverse proteins as a broadly reactive measurement probe, but also recruits reduced endogenous glutathione (GSH) to assemble a selective chemical probe of GSH-β-lactone (GSH-Lac)-alkyne in live cells. Tandem mass spectrometry reveals that MeLac reacts with nucleophilic cysteine, serine, lysine, threonine, and tyrosine residues, through either Michael or acyl addition. A peptide-centric proteomics platform demonstrates that the proteomic selectivity profiles of orlistat and parthenolide, which have distinct reactivities, are measurable by MeLac-alkyne as a high-coverage probe. The GSH-Lac-alkyne selectively probes the glutathione S-transferase P responsible for multidrug resistance. The assembly of the GSH-Lac probe exemplifies a modular and scalable route to develop selective probes with different recognizing moieties.     

Chemical durability and surface alteration of lanthanide zirconates (A2Zr2O7: A = La-Yb)

Chemical durability of lanthanide zirconates (A₂Zr₂O₇) (A = La-Yb) under near-field environments is important for evaluating their application as potential nuclear waste forms. In this work, A₂Zr₂O₇ (A = La-Yb) are synthesized by spark plasma sintering with controlled microstructure and their chemical durability are evaluated in a nitric acid solution (pH = 1). Scanning transmission electron microscopy analysis reveals an amorphous passivation film either enriched with Zr or lanthanide. The complex chemistry of the passivation films can be correlated with a transition in corrosion mechanisms from a preferential release of lanthanide in La₂Zr₂O₇ to a preferential release of Zr in Er₂Zr₂O₇ and Yb₂Zr₂O₇. These results suggest a dominant mechanism of incongruent dissolution and surface reorganization for the formation of passivation films. Strong correlations are identified between the leaching rates and cation ionic size, ionic potential, electronegativity differences between A-site cation and Zr, and bonding valence sum of oxygen, suggesting important impacts of structural and bonding characteristics in controlling chemical durability of lanthanide zirconates.